The grain is very fine, with some rare white spots. The colour variation is minimal from batch to batch

Weight - 2.690 kg/m3
Wear Resistance - 22.70 mm
Water Absorption at Atmospheric Pressure - 1%

This natural stone is suitable for internal use: floor, wall, vanity tops and stair covering in both private housing and in public buildings with moderate and intensive collective use. The stone material and the stone finish should be selected to suit the area it is being applied to.

Can have occasional weakness in the veins.

Honed, Polished, Brushed, Sand blasted, Bush hammered

Standard tiles sizes, cut to size and bespoke.
Slabs 20mm and 30mm

For flooring it is advisable to use a dry micro fiber mop where possible, to reduce the risk of scratching.

When wet washing always use an acid-free product! Allow the floor to dry thoroughly during the first 3 to 6 months. During this period it is important to use only a small amount of water to mop the floor and allow the surplus moisture to evaporate from the tiles; also use a product that does not seal the pores of the stone (e.g. Lithofin MN Easy Care Cleaner). This product is always added to the wash water and can be used for future regular cleaning.

When the finished surface is completely dry, sensitive areas can be protected with a suitable sealer.
(e.g. Lithofin MN Stain Stop).

Good availability